Electricity usage analysis
Your plant’s electricity, read on one screen
Load pattern, bill composition and power factor, all from KEPCO data — the 15-minute load profile, the monthly bill and the metered power factor.
Billed this month
₩55.79M
Use against contract demand
86%
Billed demand 1,284kW
Load factor
58%
Average vs peak demand
Power factor
Normal
Lagging 92.4% · leading 96.2%
Billed demand is 86% of the 1,500kW contract demand, and the peak is set in the afternoon. Spreading that load and correcting power factor leaves room to bring the demand charge down.
15-minute load curve
KEPCO load profile · billing month 2026.05 · kWh per 15 minutes
Peak demand
688 kW
Time of peak
14:15
Usage that day
9,509 kWh
Load factor
58%
Load concentrates in the afternoon, and that is where peak demand is set. Moving part of the process out of the peak window into off-peak hours lowers both the billed demand and the demand charge.
Run this on your own data
The screen above is a sample. Request the analysis and our team will call you to set up the KEPCO data connection, so the same screen runs on your site’s measured values.
The figures shown are a demo sample. Data source: KEPCO OPM (getCustInfoData·getCustBillData·getDayLpData). Power factor rates and credit thresholds are shown for guidance; a precise calculation reflects your contract type and time-of-use periods.